ETIX 105/25 Painting fabric 45

Description

The substrate on which the paintwork is applied must be dry, clean, level and free of particles that prevent adhesion. The minimum air and substrate temperature during installation is + 5 ° C. Before applying the painting cloth, cover the substrate with a suitable glue. When applying the adhesive with a roller, make sure that the surface is evenly covered with the adhesive - unevenness under the fabric can damage the appearance of the surface. When applying the adhesive by the spray method, it is important to follow a uniform material consumption specified by the adhesive manufacturer so that not too much adhesive is applied to the substrate. To avoid structural differences, install the fabric only in one direction with an overlap of approx. 2-5 cm. Press the glued tiles completely with a wallpaper brush or roller, making sure that no air bubbles remain under the fabric. Then cut through the overlaps of both panels at once and remove the cut strips. This will achieve a well-matched overlapping joint. It is not recommended to cover the inner corner with paint. After fixing the corners, cut off the excess fabric with a knife. When pasting the outer corners, continue with the fabric. If finishing is done in several stages, make sure that the fabric has dried before starting a new stage.