Select your language
ETIX 106 Reinforcement Mesh 60
60g / m2 fiberglass reinforcement mesh is used in interior finishing works to strengthen the surface putty. The polymer dispersion-coated reinforcement mesh helps to prevent cracks in the reinforced finishing surface.
Description
| Fiberglass mesh | Weight (g/m2) | Mesh size (mm) | Roll (m2) | On the pallet (pc) |
| ETIX106 | 60 | 2x3 | 50 | 60 |
ADVANTAGES
· Helps prevent cracks on the reinforced finish
· Alkali resistant
· Non-stretchable and tear-resistant
INSTALLATION
Apply the putty mixture across the width of the reinforcement mesh panel to the surface to be finished so that the thickness of the mixture is about 2/3 of the final layer thickness. Push the reinforcement mesh straight into the mixture without wrinkles. Spread the mixture through the meshes. Install the following panels with a 10 cm overlap. Putty the reinforcement mesh so that the mesh is completely covered with the mixture. The total thickness of the finishing layer depends on the mixture used.
MATERIAL
Polymer Glass fibers coated with a dispersion.
STORAGE
Store upright, keep dry and protected from moisture.
PDF Product Sheet